GUARDOFF Shock Detectors
The Guardoff® shock detector WSD series offers the choice of piezoelectric or mass inertial transducer. It also features a wide range of sensitivity settings, making it suitable for all applications.
The wireless shock detector provides full supervision including tamper, low battery and RF interruption.
Hardwired Shock Sensors WSD02 & 01
WSD02:
- Mass inertial vibration sensor
- Gold plated, self cleaning contacts – highly corrosion resistant
- Suitable for horizontal or vertical mounting
- Wide range of sensitivity settings
- Option of non-latching or latching settings
- Dual LED indicators for power and alarm
- The relay is protected by metal casing to minimise magnetic interference
- Built-in reed switch
WSD01:
- Piezoelectric transducer
- Wide range of sensitivity settings
- Pulse counting selection
- Dual LED indicators for power and alarm
- Built-in tamper protection
- Option of non-latching or latching settings
WSD02:
- Power 9-16VDC
- Current 15 - 18mA
- Reed gap 28mm
- Operating temp -10 to +55℃
- Relay rating 500mA 100V; 10 Ohm in series
- LED indication Red=Alarm; Green=Power
- Pulse counting One or two
- Dimension 100 × 29 × 24mm
WSD01:
- Power 9-16VDC
- Current 15 - 18mA
- Operating temp -10 to +55℃
- Relay rating 150mA 24V; 10 Ohm in series
- LED indication Red=Alarm; Green=Power
- Pulse counting One or two
- Dimension 87 × 26 × 21mm
Wireless Shock Sensor WSD10
- Complete transmitter monitoring and status display: tamper, low battery and RF interruption together with transmitter ID
- Large capacity: up to 1000 transmitters
- Audio alert
- Events retrievable
- Built-in tamper protection
- Mass inertial vibration sensor
- Gold plated and self cleaning contacts
- Built in reed switch
- Long battery life: up to 6 years with typical use
Transmitter:
- RF range: 100m (open air)
- Transmitting power: <10mW
- Current: 5uA – 15mA
- Battery: 3.6V; Lithium; 1/2AA (ER14250)
- Battery life: up to 6 years with typical use
- Reed gap: 28mm
- Operating temp: -10 to 55℃
- Dimensions: 100 x 29 x 24mm
Receiver:
- Power: 9-16VDC
- Current: 8-120mA
- Frequency: 433.92MHz
- 4-digit display
- Capacity: 1000 transmitters
- Dimensions: 89 x 65 x 29mm
